How to Replace a Bulk Dart Shaft O-Ring

How to Replace a Bulk Dart Shaft O-Ring

One of the most important parts of a dart shaft is an o-ring.bulk dart shaft o-ring The reason for this is that the entire dart shaft is supported by this one ring, and it is also what controls the force that goes through the darts. This article is going to cover what an o-ring is, why you need it and how to replace it. After reading this, you should have a better understanding of how to replace an o-ring. Here are the facts.

What is an o-ring? It is a ring that surrounds the bulk of ball material that is used in the manufacturing of a dart shaft.bulk dart shaft o-ring Before the invention of plastics, this material was used in large metal sheets that were used in the manufacturing of firearms. The metal needed to be hardened so that it could withstand the force that was being placed through the bullet. Over time, the metal became less dense, and it began to lose its properties, until it became a smooth, soft metal.

There are two major types of o-ring that can be used in a bulk dart shaft: a captive o-ring, which has a tapered or domed edge; and an open o-ring. The captive o-ring needs to be tightly secured around the piece of art so that it can maintain its roundness and shape without any outside interference. On the other hand, the open o-ring is where the edges of the bulk dart shaft can press against each other. It is a commonly used type of o-ring.

So why would you need to replace an o-ring? Most people don't think about it, but a poor fitting o-ring can reduce the efficiency of your dart shooters. In order for the dart to fly straight and high, there needs to be as little backspin as possible. With a bent or skewed o-ring, the dart will counteract with the side of the bullet instead of going straight and to the target. This not only effects your accuracy, but it also decreases your distance. Many quality bulk dartshafts will have the proper o-ring installed for optimum performance.

Before you replace your o-ring, make sure you're shooting a standard size dart. Darts vary slightly from brand to brand. If you're replacing an o-ring, be certain that the size you buy is compatible with the type of art you have. Some bulk darts have lead tapered holes along the length of their shank, which is completely acceptable if you are shooting regulation ammo. However, regulation ammo will tend to mushroom when shooting at an aggressive pace, and the resulting shot will hit more the side of the target than the center.

You should consult with your local sporting goods store for their bulk dart shafts and bulk darts selection. They are usually quite knowledgeable about the specifics of their products. Don't be afraid to ask them specific questions about the pros and cons of their bulk dart shafts or about the general range of prices for their product line. You never want to waste money on a bulk order of darts unless you absolutely have to.