News
Tips to Install a Billiard Cue Slicker Easily
Tips to Install a Billiard Cue Slicker Easily
The billiard cue slicker is one of the most important billiard accessories that you should have.billiard cue slicker It does not only make your game look more elegant, but it also makes the entire act a lot more fun and exciting. There are many billiard players out there who do not have any clue about how to maintain this certain piece of equipment so here are the basic steps on how to perform the maintenance on this piece of equipment. Read on to find out how to properly play pool right with your billiard cue slicker.
First things first, you need to remove the protective sheet that covers the cue stick. This is done by unscrewing the little lock which is found at the back of the billiard pool table. Once the lock is unscrewed, you can remove the sheet easily. If you have a laminated billiard pool table, then there will be a lip attached to the billiard pool table which needs to be taken off. After that, you need to carefully slide off the laminated part which is located near the cue ball.
Next, the little rubber band attached to the billiard stick needs to be pried out using a screwdriver. The screwdriver needs to be used in order to pry the rubber band off so that you can access the shaft slicker cleaner. Once you are able to reach into the billiard stick, you need to remove the little rubber band which is located around the little rubber grip. The shaft slicker cleaner can be used to wipe out the dirt or even polish the little rubber grip.
The third step on how to play pool right with your billiard cue stick slicker cleaner is to place the billiard cue stick shaft slicker cleaner onto the table and start rubbing the ball with your fingers. When you are rubbing the ball with your fingers, you need to keep some pressure on the tip of your fingers so that it will make the rubbing motion. You should repeat the rubbing process for around five to ten seconds. Once you have done this, you can then cover up the cue ball with a billiard cue stick shaft slicker.
The fourth step is to take your cue stick and place it onto the ground near the regulation board which is located at the very center portion of the room. Once you have placed it on the board, you need to take your billiard cue stick through the regulation stick holder which is located on top of the billiard table. You need to look at the length which is two inches high and two inches wide. By measuring the length which is two inches high and two inches wide, you will know how much of an allowance you have on the bottom of the billiard table which is twenty-two inches.
The fifth step is to put the sticker on the board. It is best for you to use a billiard stick slicker which has a laminated surface. A billiard board slicker can easily come in different colors such as white, black, red, blue, green, ivory, brown and yellow. There are also many different patterns such as stripes, florals, stars, hearts, wings, circles, oval numbers and other designs are available in many of these laminates. If you want something unique, you can always go for the customized laminates which are very popular these days.
0users like this.
